Intek Heat-Resistant Paint

Intek Heat-Resistant Paint

1. Product Description:

• INTEK heat-resistant paint is specially formulated to prevent heat on corrugated iron roofs of factories and houses, effectively reducing temperatures by 12 to 26 degrees Celsius.
• This water-based paint has heat-resistant properties and is manufactured with a special formula that effectively reduces heat, withstands hot climates, prevents heat transfer and light reflection, and blocks the sun's rays.
• INTEK heat-resistant paint is designed for high insulation efficiency, reducing surface temperatures by 12-26°C when the temperature on the corrugated iron roof exceeds 60°C.
• It has high adhesion and can be applied to a variety of materials.
• Using heat-resistant paint in hot weather can increase labor productivity and save energy.
• It protects and increases the durability of the corrugated iron roof and reduces noise during heavy rainfall.

2. Technical information:

• Ingredients: Adhesive compound, film-forming agent, additives, water.
• Thickness: Can increase up to 0.25-0.35 mm after applying 2-3 layers.
• Theoretical coverage: 6-8 m2/Liter/Layer.
• Construction tools: Sprayer, roller, brush.
• Clean construction tools with water.
• Can be used on various heat-resistant material surfaces such as corrugated iron roofs, tile roofs, concrete walls of factories, farms, houses, schools, hotels, hospitals, shops, and warehouses.

3. Application process:

Surface preparation:

• The surface to be painted must be cleaned and free of dirt, grease, or impurities.
• Surfaces with old paint, rust, or impurities need to be cleaned before applying.
• If the surface is concrete and has cracks, they need to be repaired and plastered before painting.

Application of heat-resistant paint:

• Concrete wall: Mix the first layer with 15-20% clean water. For the next two coats, if the paint is thick, it can be mixed with 5% clean water.
• Old and rusted corrugated iron: It is recommended to use INTEK anti-rust paint or INTEK multi-purpose primer as a primer before applying heat-resistant paint.
• New corrugated iron: Depending on weather conditions, apply 2-3 layers of INTEK heat-resistant paint with a thickness of 0.25-0.35 mm. The construction time between each layer should be 1-2 hours apart. Apply the first coat thinly to prevent surface cracking or peeling. If the paint is difficult to apply, it can be diluted with 5% clean water. If the surface is dry and quickly absorbs paint, it can be easily diluted more than the recommended ratio.

4. Notes:

• Stir the paint well before use.
• Do not apply when the outside temperature is below 5°C, humidity is over 85%, or wind is above level 4.
• Avoid applying during rainy or hot weather. It is recommended to apply in the morning or afternoon when the surface temperature does not exceed 35°C.

5. Warranty:

• Store in a cool, dry place away from heat and sunlight. Keep the lid tightly closed.
• Keep out of reach of children.
• Expiry date: 24 months from the date of manufacture.